[ROM] VorteX RC1

[LOTL]

Ok so i hopped on the Vortex RC1 bandwagon and didnt heed the baseband .13P recommendation.
Im on baseband 1.09.07P and had no problems flashing the ROM or running it.
Being that .07P is 2 versions older than .13P, im thinking it might be a good idea to update.

After doing some digging, it looks like i will have to SBF back to Froyo .340 and run the baseband updater from this rootzwiki link.

I also read where some people had just SBF back to Gingerbread .602 and that updated their baseband version to .13P. Before flashing the Vortex RC1 ROM, i was on a .602 SBF which i had installed via the Linux boot disk method. I had troubles with RSD Lite on my Windows 7 64 machine. I read here that if you use the Linux boot disk method, that the baseband version will not be updated. That would explain why i was still on .07P.

So my choices are SBF back to .340 and use the baseband updater. SBF back to .602 using RSD Lite (if i can get it to work) or just leave well enough alone with .07P. I figure if i can live with .07P for a while, then wait for the next RC of Vortex and then jump through the baseband update hoops.

Great ROM by the way!

Edit: Just in case someone reads this without reading my next couple posts. I ended up using 1KD's linux boot disk to SBF back to .602, then did OTA .605 to upgrade my baseband to .13P. Got Vortex RC1 loaded again and all is well. Read ahead for links to 1Kd's disk etc.

[Ads]

[rickw]

Ok so i hopped on the Vortex RC1 bandwagon and didnt heed the baseband .13P recommendation.
Im on baseband 1.09.07P and had no problems flashing the ROM or running it.
Being that .07P is 2 versions older than .13P, im thinking it might be a good idea to update.

After doing some digging, it looks like i will have to SBF back to Froyo .340 and run the baseband updater from this rootzwiki link.

I also read where some people had just SBF back to Gingerbread .602 and that updated their baseband version to .13P. Before flashing the Vortex RC1 ROM, i was on a .602 SBF which i had installed via the Linux boot disk method. I had troubles with RSD Lite on my Windows 7 64 machine. I read here that if you use the Linux boot disk method, that the baseband version will not be updated. That would explain why i was still on .07P.

So my choices are SBF back to .340 and use the baseband updater. SBF back to .602 using RSD Lite (if i can get it to work) or just leave well enough alone with .07P. I figure if i can live with .07P for a while, then wait for the next RC of Vortex and then jump through the baseband update hoops.

Great ROM by the way!

i have a link somewhere for 13p update,i'll see if i can find it

[rickw]

sorry,link won't work for gb only froyo,however i use 1kdstar disc when i sbf it gives me 13p

[LOTL]

sorry,link won't work for gb only froyo,however i use 1kdstar disc when i sbf it gives me 13p

Took me a little while to find it. Thought i would post a link to where you can get the 1KDstaz boot disk.
Im not sure what Linux boot disk i tried previously, will have to check and make sure it isnt 1KD's.
1KDstaz Link

[Maguel]

Took me a little while to find it. Thought i would post a link to where you can get the 1KDstaz boot disk.
Im not sure what Linux boot disk i tried previously, will have to check and make sure it isnt 1KD's.
1KDstaz Link

I used the linux boot disc for .602 and had to take the OTA update to .605 to get the .13P baseband.

[ajordan]

Devortex - have you thought about customizations for the Lock screen built into the next update?

[dannysouth31789]

Is there a way I can get Swype back on vortex rc1? ?

Sent from my DROIDX using Droid X Forums

[jono_0101]

Hey everyone, not sure if this is a problem with the rom, or if I'm having hardware problems, but since you were all so helpful before, I thought I would post here and see what everyone thinks. I picked up a few of the 10cent apps in the market, no problems yesterday,but went to get one today, and it wouldn't download, said it failed to complete the purchase, I rebooted and tried to turn on wifi to dl that way, and wifi won't work at all, in the settings menu, when I press to turn on wifi, it immediately stops and says error. Has anyone else had problems with wifi on this rom? or does it sound like a hardware failure?

Sent from my GT-P7510 using Droid X Forums

[jeems]

Is there a way I can get Swype back on vortex rc1? ?

Sent from my DROIDX using Droid X Forums

Swype | Text Input for Screens

Go here. I think you need to register and then you can download swype beta. Make sure you have Unknown Sources checked under settings>applications when you go to install.

[csk415]

Is there a way I can get Swype back on vortex rc1? ?

Sent from my DROIDX using Droid X Forums

Swype | Get Swype

Ninja'd by 1 min.