Linux solution to your Windows/RSD lite problems

[ohdavelo]

no i have not, i will try now. Thought I had to do the standard stock. I can flash to MIUI from .596 or .602 right?

[Ads]

[blabonte]

Yes, 2.3.340 will work fine with the 30.04 bootloader.

I tried testing iso and got to script and hit #2 no to exit and it came to a enter password? will this do it for the #1 start when I am in bootloader mode and ready to go? I had to just control alt delete to exit. I entered tux and nothing? just wondering thanks.

[ohdavelo]

If you press 1 it should go straight to flashing the iso

[blabonte]

If you press 1 it should go straight to flashing the iso

ok thanks that what i needed to know.

[1KDS]

no i have not, i will try now. Thought I had to do the standard stock. I can flash to MIUI from .596 or .602 right?

You'll have to check the miui thread for compatible versions, it's been a while since I've ran it.

[mobile]

[ohdavelo]

After flashing .602 , i get this error. Failed flashing process. Failed flashing process. Phone(0000): Error switching phone to BP Pass through mode (0x70BE);phone disconnected

[1KDS]

With RSD Lite it looks like, have you tried the Linux iso from the OP?

[ohdavelo]

I have the iso downloaded, but my battery is dead and now it says Battery is low, can't program. So I don't know what to do

[1KDS]

You can charge it in another DX, a friend, a VZW store, there are external chargers available for a few bucks, there is a cut USB cord method that I wouldn't recommend but has helped a few people out in a pinch.

[Karem]

Thanks for this! I just tried it right now but the script seems to hang up at one point. After the boot baby boot part, the script runs and then it stops at "Requesting events from the Kernel..." It's been stuck there for over 20 minutes now and I tried pressing enter, 1, etc...nothing works. I didn't even get to the part that the screenshots show in the op where you select if you want to flash or not.Can anyone provide some insight on how to fix this? My phone isn't connected to the computer although I've tried it connected as well and that still doesn't work.