Stuck in bootloader 30.04 please help
I just updated my phone the other day to the new version which made me lose root. So I downloaded the Z4 (or whatever its called) to root it again.
Then today while I was bored at work, I was looking into overclocking the phone. I downloaded jrummy. I was reading that the phone would be fine as long as I didn't click on the "apply at boot" button. So i tried med voltage at 1.4ghz. The phone was put into that mode, but was lagging very hard and taking up to 30 sec to go to another screen, so I pulled the battery to reboot it.
Now it is stuck in bootloader 30.04
Please help. I need this phone for work :/
12-20-2010 12:19 AM
Droid X Forums
boot into stock recovery: turn phone off then once it's off hold power and home button down once you see the droid and the exclamation press search button
use the volume rocker buttons to go down - wipe data/factory reset and select with camera button
then press back button select reboot now
Last edited by wicked; 12-20-2010 at 12:30 AM.
After putting in the battery, it just says:
OK to Program
Holding down those buttons doesn't do anything...
take out the battery and leave it out for about a minute
put the battery back in and then do the steps I told you and see it if you still get that screen
I have removed the battery. The phone instantly goes onto that bootloader page without me pressing a button. I can't get it to turn off with the holding of any button. I also tried putting in the battery while hold those two buttons, but that didn't get me past the bootloader either
Sorry about your luck but you're going to have to do an SBF
guide and download link here http://www.droidxforums.com/forum/dr...ing-guide.html
My computer won't recognize the phone when its connected to the usb port. I have installed the latest drivers listed in the tutorial... and suggestions on how to get my computer to recognize the phone?
My computer used to recognize the phone before this problem... now it only says: "one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it"
or i'm trying the linux approach...
but when i bring up terminal and type in "chmod +x sbf_flash"
is says "chmod: cannot access 'sbf_flash' : no such file or directory"