PDA

View Full Version : Stuck in perpetual bootloader screen...



stang07
05-07-2013, 03:46 PM
I tried to sbf, and it seems to end early, after CG66...phone says "Code Corrupt"....HELP! BTW, running 621...

GoCliffGo05
05-07-2013, 04:17 PM
Try using this? http://www.droidxforums.com/forum/showthread.php?p=580701

You'll want the sbf and root file.

Sent from my XT926 using Xparent Cyan Tapatalk 2

stang07
05-07-2013, 07:16 PM
I at least have it working now. Now, it's just acting "weird". None of my purchased apps will download, and Clockwork can't seem to load anything. I don't know what's up...I actually used Nero to burn the image...could that have anything to do with it? Google Play is also a "no show". It reverted to Market...

sd_shadow
05-07-2013, 07:36 PM
yes market is stock, it will upgrade to play
did you wipe data in recovery? you may need to.

Sent from my XT862 using Droid X Forums

stang07
05-08-2013, 07:50 AM
I did, several times, but it's made no difference with my problems...I'm almost afraid to try again...I don't want a "brick"!

sd_shadow
05-08-2013, 09:45 AM
is it just purchased apps that will not install or anything from market?
could be a setting
Enable / Disable Data - DROID X by Motorola
(http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=39255)menu>system settings>battery & data manager>
(http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=39255)data saver (http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=39255) should be uncheck, unless you are trying to limit data usage
and
menu>system settings>battery & data manager>data delivery (http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=40165)
check 'data enabled'
check 'background data'


(http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=39255)

stang07
05-08-2013, 10:20 AM
It's kind of like my computer "flakes out" and goes to a blank screen before it's finished...this is getting irritating! Then I get a "Code Corrupt" message in the bootloader...I also had my phone in "charge only" mode...could THIS be the problem?

stang07
05-08-2013, 03:32 PM
I just tried the RSD sbf twice, to no avail! Phone is working, but no access to apps or anything...

sd_shadow
05-08-2013, 03:37 PM
and you wiped data aka Hard Reset (http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=33552)?
did you try Safe Mode (http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=34184)?

sd_shadow
05-08-2013, 04:01 PM
It's kind of like my computer "flakes out" and goes to a blank screen before it's finished...this is getting irritating! Then I get a "Code Corrupt" message in the bootloader...I also had my phone in "charge only" mode...could THIS be the problem? using ezSBF? sounds like screen is timing out, just press a key like space bar
which file are you using? Droid_X_621-SBF-and-RootCD-2nd_edition.iso?
phone needs to be in bootloader to flash sbf
only use charge mode when using root option, and framaroot is faster and easier

stang07
05-08-2013, 06:24 PM
Duh...screen was just timing out...got it, this time...I feel like a total idiot! Thanks, sd_shadow!

sd_shadow
05-08-2013, 06:32 PM
doesn't usually happen, depends on pc settings or something.
had me a little nervous, first time it happened to me.